How to firmware upgrade by USB?

How to firmware upgrade by USB?

The below is the instructions on how you can updateour tablet with a USB thumb drive, please note that to receive the firmware itself, you will still need to contact us at sales@glorystargroup.com to receive your firmware, provided that you provide us with your serial number. 

How to load the firmware onto the USB Flash Drive? 

DO NOT UNZIP THE "UPDATE" FILE THAT HAS BEEN PROVIDED BY GLORY STAR. THIS IS THE FIRMWARE FILE 
Please ensure the FORMAT IS FAT32 





How to update the firmware by USB Flash Drive? 


































    • Related Articles

    • How to update firmware by Computer?

      The below is the instructions on how to update firmware by computer to our android series of tablets. We usually use this only when the tablet is stuck or when the updating by USB does not work. For the actual firmware, you will need to contact us at ...

    • Firmware to revert to Android default launcher (remove Staros launcher)

      Date: September 7th, 2021 Device affected: NEB101/156/215 A firmware update can now be reverted to Android default launcher from the Staros launcher. Note that once the firmware has been updated to Android default launcher, you can only revert back ...

    • How do I access the context menu of IVIEWER an Android app?

      I am using an Android app called iViewer on Nebula 10" and 21". I managed to install it but I can't access the iViewer setting/context menu to set its GUI options. I need to access the GUI options to let it know where to load the code. In previous ...

    • Glory Star Nebula to Android default launcher

      Request for firmware update Per the instructions on your site for reverting our Glory Star Nebula to Android default launcher, we are requesting the firmware update required. We are aware that once we revert to Android, we could only revert back to ...

    • Failure to boot up

      I have a tablet model GAD010-A. It will not boot up, sits with the glorystar logo spinning. By holding the reset button on power up it will go to the screen shown below, but i cant do anything more. (cant select anything) What can i do? Solution 1. ...