How to return to STAROS after a system crash

By preforming the below, it will remove/ erase all apps/ software that did not come with the original Glory Star System 

Unplug the AC power connection 

Press and hold the VOL+ button on the back, then plug in the AC power 

Hold the button until the recovery menu appears 

Press the VOL+ / VOL- button to select " wipe data/ factory reset" 

Press the POWER button to confirm reset 

• Related Articles

• Regarding STAROS OS problem

  We can use the system properly since there is no home button or back button to get out of the system. Each time we need to turn off and turn-on the GAD for getting to home screen. Is there a update in firmware to resolve the problem or do we need to ...

• How to REINSTALL STAROS by factory reset

  Please note that if you preform a factory reset, all the datas in the device will be erased. If the STAROS Version is 10.0.6 and onwards, you can factory reset the device to have STAROS reinstalled, if it is a version before 10.0.6, you will need to ...

• STAROS 10.1 Product Announcement

  Overview This announcement address the release of Staros for 10.0 with Star Control for all standard Nebula devices starting May 2021 Compatible Products GAD101-A NEB156 NEB215 JAR101 VOD073 Features 1. Remote device management from Star Control ( ...

• STAROS 10.0 Product Announcement

  Overview This announcement address the release of Staros for 10.0 with Star Control for all standard Nebula devices starting May 2021 Compatible Products GAD101-A NEB156 NEB215 JAR101 VOD073 Features 1. Remote device management from Star Control ( ...

• Staros 10.2.7 Release note

  Overview This announcement address the release of Staros for 10.2.7 Features 1. Add testing page in Staros to see if device can connect to Star Control IOT platform 2. Device will return to its original state when remote control session ends in Star ...